College Kode

Code :- 16-bit multiplication org 100h          MOV AX,1234H MOV BX,1111H  MUL BX MOV [2000H],AX MOV AX ,DX MOV [2002H],AX ret Output :- 32-bit multiplication org 100h            MOV AX,1234H MOV BX,1111H MOV CX,1234H MOV DX,1111H  MUL BX MUL DX ret Output :-

 Code :- 16 bit addition org 100h MOV AX,0A235H MOV BX,8564H ADD AX,BX ret Output :- 32 bit addition   org  100h MOV AX,1111H MOV BX,1111H MOV CX,9999H MOV DX,9999H ADC  AX,CX ADC BX,DX ret Output :- 16 bit subtraction org 100h MOV AX,0A235H MOV BX,8564H SUB  AX,BX ret Output :- 32 bit subtraction org  100h MOV AX,1010H MOV BX,1010H MOV CX,0909H MOV DX,0909H SUB  AX,CX SUB  BX,DX ret Output :-

Code :- org 100h MOV SI,2000H MOV DI,2004H MOV CX,02H L1:    MOV AL,[SI]    MOV BL,[DI]    MOV [SI],BL    INC SI    MOV [DI],AL    DEC DI LOOP L1 ret Output :-

Code :- org 100h MOV SI,2000H MOV DI,2010H MOV CX,05H L1:     MOV AX,[SI]     INC SI     MOV [DI],AX     INC DI LOOP L1 ret Output :-

  Here i am using online IDE  Tinkercad  . If you don't know what is tinkercad then refer my blog  HERE  or else you can use offline IDE also. Code :- const int LED1 = 7; const int LED2 = 6; const int LED3 = 5; const int BUTTON1 = 2; const int BUTTON2 = 3; const int BUTTON3 = 0; const int BUTTON4 = 1; int Buttonmodel = 0; int Buttonmode2 = 0; int Buttonmode3 = 0; int Buttonmode4 = 0; void setup () { // put your setup code here, to run once: pinMode(LED1,OUTPUT); pinMode(LED2, OUTPUT); pinMode(LED3, OUTPUT); pinMode(BUTTON1,INPUT); pinMode(BUTTON2,INPUT); pinMode(BUTTON3,INPUT); pinMode(BUTTON4,INPUT); } void loop(){ //First LED interface Buttonmode1 == digitalRead(BUTTONl); if(Buttonmode1 = HIGH) { digitalWrite(LED1,HIGH); } //Second LED interface Butonmode2 = digita1Read (BUTTON2); if(Buttonmode2 = HIGH) { digitalWrite(LED2,HIGH);  } //Third LED interface Buttonmode3 = digitalRead(BUTTON3); if(Buttonmode3 = HIGH); { digitalWrite(LED3,HIGH); } //Fourth...

Here i am using online IDE  Tinkercad  . If you don't know what is tinkercad then refer my blog  HERE  or else you can use offline IDE also. Code :- int c1 = 0; int c2 = 0;   void setup()  {   pinMode(12, OUTPUT);   pinMode(A0, INPUT);  } void loop() {   c2= analogRead(A0);   c1= 1024-c2;           digitalWrite(12, HIGH);   delayMicroseconds(c1);     digitalWrite(12, LOW);    delayMicroseconds(c2);  } Output :-

Here i am using online IDE  Tinkercad  . If you don't know what is tinkercad then refer my blog  HERE  or else you can use offline IDE also. Code :- #include <Servo.h> int val; Servo servo_9; void setup() {   servo_9.attach(9); } void loop() {   val = analogRead(A0);              servo_9.write(val/4);                    delay(15); } Output :-